[Permissions]
[admin]
service_commandline=
This is used to instruct the service to start winvnc with a specific command line. This is the same syntax as the commandline except
you don't pu -run at the end.
sample: service_commandline=-autoreconnect -connect 192.168.1.30
This tell the service to make an invers connection to 192.168.1.30 and retry when it fail.
FileTransferEnabled=1
Enable Filtransfer
FTUserImpersonation=1
When doing a file transfer, act as desktop user. When you don't put 1
the filetransfer is done as user "system". User system don't have access
to mapped drives and pose a security issue... a normal user can FT as
admin.
BlankMonitorEnabled=1
This allow the viewer to blank the screen
CaptureAlphaBlending=1
Capture alphaBlending is needed for semi transparent windows
( xp, vista...) but use more cpu.
BlackAlphaBlending=0
Instead of using the powermanager to blank the monitor we put
a layered window on top and capture the windows below. Using
this option you also can define a custom blank by placing a file
"background.bmp" in the ultravnc folder.
DefaultScale=1
Set scale
UseDSMPlugin=0
Use the defined encryption plugin
DSMPlugin=
Name of the plugin
primary=1
secondary=0
When using multi-monitors ( driver required) you can define the
default behaviour. Show only primary/Secunday or both
SocketConnect=1
Need to be one, else no socket is listening for a connection
PortNumber=0
Manual set listening port ( default 5900)
HTTPConnect=1
Start a sond port, this act as webserver for java viewer
HTTPPortNumber=0
manual set port for http (default 5800)
XDMCPConnect=0
no longer used
AutoPortSelect=1
The port is 5900, but when port 5900 is already in use
the auto mode take one higher until he find a free one.
InputsEnabled=1
Allow the viewer to control the server
LocalInputsDisabled=0
Block the server input, only remote access is possible
IdleTimeout=0
Disconnect after a idle period ( 0 = default, no idle time out , seconds)
EnableJapInput=0
This can be used for Japanese and other non standard keyboards.
The key processing is different and sometimes solve issue's with
special keys.
AuthHosts=
+ =allow
- = deny
? = query
syntax:
-:+10.0.60.141:?10.0.31.169:-10.0.20.240:
instead of 10.0.60.141 you can use 10.0.60, then it is valid
for the full range of ip addresses.
QuerySetting=2
Define on how to react on the (-,?,+) from
the Authhosts.
0="+:Accept, ?:Accept, -:Query"
1="+:Accept, ?:Accept, -:Reject"
2="+:Accept, ?:Query, -:Reject [Default]"
3="+:Query, ?:Query, -:Reject"
4="+:Query, ?:Reject, -:Reject"
It is used to specify a set of IP address templates
which incoming connections must match in order to be accepted.
By default, the template is empty and connections from all
AuthHosts_Tip5="hosts are accepted. The template is of the form:
+[ip-address-template]
?[ip-address-template]
-[ip-address-template]
In the above, [ip-address-template] represents the leftmost
bytes of the desired stringified IP-address.
For example, +158.97 would match both 158.97.12.10 and
158.97.14.2. Multiple match terms may be specified, delimited
by the ":" character. Terms appearing later in the template
take precedence over earlier ones. e.g. -:+158.97: would filter
out all incoming connections except those beginning with 158.97.
Terms beginning with the "?" character are treated by default as
indicating hosts from whom connections must be accepted at the
server side via a dialog box. The QuerySetting option determines
the precise behaviour of the three AuthHosts options.
QueryTimeout=10
QueryTimeout is the time the messagebox is shown.
QueryAccept=0
This popup a timed messagebox to allow the user (server site)
to allow/reject an incoming connect.
QueryIfNoLogon=0
Disable/enable query settings when no user is logged.
LockSetting=0
0="none"
1="lock workstation on disconnect(NA)"
2="logoff on disconnect"
MaxCpu=xxx
MaxCpu=100 (winvnc can use full 100% cpu)
MaxCpu=40 (winvnc can use max 40% cpu)
RemoveWallpaper=1
A image as background takes more cpu and bigger bandwidth
then a solid color. Disable on viewer connect, reenable on exit.
RemoveAero=1
Remove Aero on viewer connect and reset on exit.
Makes Vista win7 Faster
Avilog=0
Current not used
path=d:\ultravnc_src\ultravnc\winvnc\debug
Define the place to save the winvnc.log file.
Make sure this spot is writable by system ( no mapped folder)
DebugLevel=0
DebugLevel indicates how much debug information to present.
Any positive integer is valid. Zero indicates that no debugging
information should be produced and is the default. A value of
around 10-12 will cause full debugging output to be produced
DebugMode=0
Run-time logging of all internal debug messages is now
supported. Log data may be output to a file or a console window
or the MSVC debugger if the program was compiled with debugging
active.)
AllowLoopback=0
By default, WinVNC servers disallow any vncviewer connections
from the same machine. For testing purposes, or, potentially,
when using multiple instances of WinVNC on Windows Terminal
Server, this behaviour is undesirable.
LoopbackOnly=0
By default, WinVNC servers accept incoming connections on an
network adapter address, since this is the easiest way of coping
with multihomed machines. In some cases, it is preferable to
only for connections originating from the local machine
and aimed at the "localhost" adapter - a particular example is
the use of VNC over SSH to provide secure VNC. Setting this
will cause WinVNC to only accept local connections - this
overrides the AllowLoopback and AuthHosts settings.
AllowShutdown=1
AllowProperties=1
AllowEditClients=1
Enable Disable options in server menu
FileTransferTimeout=30
KeepAliveInterval=5
Timings for Filetransfer and keepalive message (seconds)
DisableTrayIcon=0
Don't show the winvnc tray icon. Without the tray icon you can't
make realtime changes. You need to edit the ultravnc.ini manual
or use the uvnc_settings.exe to modify the file. Settings take efect
after winvnc restart.
MSLogonRequired=0
Use MS password instead of the vncpasswd
NewMSLogon=0
Use ACL instead of a group list
ConnectPriority=0
ConnectPriority indicates what WinVNC should do when a"
non-shared connection is received
By default, all WinVNC servers will disconnect any existing
connections when an incoming, non-shared connection is
authenticated. This behaviour is undesirable when the server
machine is being used as a shared workstation by several users
or when remoting a single display to multiple clients for
viewing, as in a classroom situation.
UseRegistry=0
0= use ultravnc.ini
1= use tegistry the same way as in v102
AuthRequired=1
By default, all WinVNC servers will not accept incoming
connections unless the server has had its password field set
to a non-null value. This restriction was placed to ensure
that misconfigured servers would not open security loopholes
without the user realising. If a server is only to be used on
a secure LAN, however, it may be desirable to forego such
checking and allow machines to have a null password.
sendbuffer=xxxx
variable available starting uvnc 1.0.8.0
sendbuffer=1500 (wifi or value less)
sendbuffer=4096 (lan 100Mbit)
sendbuffer=8192 (lan 1GBit, aka jumbo packet)
[ultravnc]
passwd=AAA967DDDDD692AE9C
passwd2=D00590A01299C90079
password lenght 8 byte alphadigit + 1 byte alphadigit checksum by uvnc but ignored
you can use vnc pwd generator and then manually add 2 caracters alphadigit
passwd = full control read/write
passwd2= watch (read only) <-- available since uvnc 1.0.8.0
never use both same password ! otherwise, only watch, read only
[poll]
TurboMode=1
Fast scan screen, some small changes can be missed
PollUnderCursor=0
Poll the window below the cursor
PollForeground=0
Poll the foreground window
PollFullScreen=1
Poll the full screen ( default)
OnlyPollConsole=0
Don't use
OnlyPollOnEvent=1
Bad updates, only poll screen when mouse/keyboard is used.
Minimize bandwidt
EnableDriver=0
Use mirror driver when installed
EnableHook=1
Use hookdll when installed
EnableVirtual=0
SingleWindow=0
SingleWindowName=
Current not used
[admin_auth]
group1=
group2=
group3=
locdom1=0
locdom2=0
locdom3=0
Used by MSlogon ( not new mslogon)
